Product Details:
Payment & Shipping Terms:
|
NE40: | CR5D00E2ND70 LPUI-240 |
---|
Attribute |
Description |
---|---|
Board name silkscreen |
LPUI-240 |
Description | 2-Port 100GBase-QSFP28 Integrated Line Processing Unit (LPUI-240) |
BOM | 03057484 |
Model | CR5D00E2ND70 |
Product |
Minimum Version Requirement |
---|---|
NE40E-X8 | V800R010C00 |
NE40E-X16 | V800R010C00 |
NE40E-X8A | V800R010C00 |
NE40E-X16A | V800R010C00 |
Name |
Description |
---|---|
OFL | Before removing a board, press and hold the OFL button for about 6 seconds until the OFL indicator turns on. Then, you can remove the board. |
Breakout | When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling. |
Name |
Description |
---|---|
OFL (red) | If this indicator is steady on, you can remove the board. |
RUN (green) | If this indicator blinks every 2 seconds (0.5 Hz), the system is running properly. If this indicator blinks twice each second (2Hz), the device is starting and has not completed registration. |
L/A (green) |
If this indicator is steady on, the link is Up. If this indicator is blinking, data is being transmitted and received. If this indicator is steady off, the link is Down. |
0 to 3 100GE Breakout (green) |
Breakout 0-3: breakout indicator. If breakout indicator X is on, the interface indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, interface indicators are showing the running status of breakout channel 0 (if an interface indicator is blinking, breakout channel 0 on this interface is receiving and transmitting data); if breakout indicator 1 is on, interface indicators are showing the running status of breakout channel 1. If the board has breakout interfaces, each breakout indicator for channels 0 to 3 turns on for 5s in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each interface, press the Breakout button to have breakout indicator 1 turns on. |
Interface Name |
Interface Type |
Connector Type |
Description |
Cable |
---|---|---|---|---|
0 to 1 | 10G LAN/WAN or 40GE or 100GE | QSFP28/QSFP+ | Interface for inputting and outputting 10G LAN/WAN or 40GE or 100GE optical signals | Optical fiber |
Functions and Features |
Remarks |
---|---|
Line-Rate capability | Provides two 100GE interfaces for line-rate transmitting and receiving. |
Whether interface splitting is supported |
Yes To enable interface splitting, run the port split command to complete interface splitting configuration. |
Reliability and availability | Hot swappable. |
Restrictions and remarks | All the four 10GE interfaces split from one interface must work in the same LAN or WAN mode(The interfaces working in WAN mode can function only as master interfaces). |
Attribute |
Description |
---|---|
Optical type supported | |
Working mode | Full-duplex |
Compliant standard | IEEE 802.3 |
Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
Item |
Specification |
---|---|
Dimensions (H x W x D) | 40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x 21.09 in.) |
Typical power consumption | 312.0 W |
Typical heat dissipation | 1012.3 BTU/hour |
Weight | 10.0 kg (22.05 lb) |
Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms: -5 °C to 55 °C (23°F to 131°F) |
SEEKER(SEEKER TELECOM (CHINA) CO., LIMITED)
Email:tac2@gzseeker.com
P:+86-20-82511041
SKYPE:gzseeker2011